请选择 进入手机版 | 继续访问电脑版
 找回密码
 立即注册
查看: 241|回复: 13

新的教程

[复制链接]
发表于 2018-8-29 22:07:00 | 显示全部楼层 |阅读模式

马上注册,结实更多好友,浏览不受限制!

您需要 登录 才可以下载或查看,没有帐号?立即注册

x
hello,我是raymond,好久没发帖子了,最近大家有什么想问的都可以问我,在这个帖子下面续帖进行提问和回答,关于rush,手雷投掷,以及Hot Snow新分队Hot Snow.C的了解问题,我都会解答
回复

使用道具 举报

发表于 2018-8-30 12:10:17 | 显示全部楼层
创建服务器只显示在区域网怎么解决?
回复

使用道具 举报

 楼主| 发表于 2018-8-30 15:02:29 | 显示全部楼层
emm,这个我没听明白,是只显示在局域网中吗?服务器列表中没有?
回复

使用道具 举报

 楼主| 发表于 2018-8-30 15:10:28 | 显示全部楼层
本帖最后由 啦啦啦 于 2018-8-30 15:12 编辑

如果是没有人能看到的话,有可能是因为服务器出现问题,显示在了局域网,不过没关系,别人依然可以使用它。如果确认别人看不到,建议参照usgn官网上的F.A.Q来查询( F requently A sked Q uestions,常见问题),如下:ATTENTION: Testing from within the same network might fail!It is possible that people from within the same network/internet connection (e.g. 2 PCs connected to the same router, one hosting, other one viewing the serverlist) can't see each other. This does NOT mean, that nobody sees your server! It can be caused by wrong router settings and many other things. It might work perfectly well for everyone outside your network! Please ask someone who is not using the same internect connection to check if he sees your server!

ChecklistAn unlisted server can be caused by wrong settings or other problems. Try/check the following:
  • Maybe the U.S.G.N. is down. Check its status at USGN.de and try again later

                                   
    登录/注册后可看大图
  • Make sure your setting "sv_lan" is set to 0! Execute "sv_lan 0" to change it!

                                   
    登录/注册后可看大图
  • Enter "usgn_info" in the console (or execute with RCon) and see if the U.S.G.N. address is 85.214.102.60
  • Enter "usgn_addserver" in the console (or execute with RCon) and see if it adds your server to the list
  • Configurate all firewalls so they don't block messages of the CS2D server
  • Restart (reboot) your whole server completely (not just the CS2D server program)
  • Just wait! It might take some time until your server is added*

*) It normally takes just a few seconds until your server is added. Some people report that it takes hours for their servers. We actually don't know why it takes so long for some servers. Please be patient.

Also don't just check the in-game list! Open the server ip list and search for your IP there. Please read "Nobody joins/sees my server" if your IP is listed there but if your server is not visible to others in the in-game list.

翻译:
注意:在同一网络内进行测试可能会失败!来自同一网络/互联网连接的人(例如,连接到同一路由器的2台PC,一台主机,另一台查看服务器列表)可能无法看到对方。这并不意味着,没有人看到你的服务器!它可能是由错误的路由器设置和许多其他因素引起的。对于网络外的所有人来说,它可能非常适合!请询问未使用相同内部连接的人检查他是否看到您的服务器!

清单未列出的服务器可能由错误的设置或其他问题引起。尝试/检查以下内容:
  • 也许USGN失败了。在USGN.de上查看其状态,稍后再试

                                   
    登录/注册后可看大图
  • 确保您的设置“sv_lan”设置为0!执行“sv_lan 0”来改变它!

                                   
    登录/注册后可看大图
  • 在控制台中输入“usgn_info”(或使用RCon执行),查看USGN地址是否为85.214.102.60
  • 在控制台中输入“usgn_addserver”(或使用RCon执行),看看它是否将您的服务器添加到列表中
  • 配置所有防火墙,使其不会阻止CS2D服务器的消息
  • 完全重启(重启)整个服务器(不仅仅是CS2D服务器程序)
  • 等一下!添加服务器可能需要一些时间*

*)通常需要几秒钟才能添加服务器。有些人报告说他们的服务器需要几个小时。我们实际上不知道为什么一些服务器需要这么长时间。请耐心等待。

另外,不要只检查游戏内列表!打开服务器ip列表并在那里搜索您的IP。如果您的IP列在那里,但是如果您的服务器在游戏列表中的其他人看不到,请阅读“没有人加入/看到我的服务器”
转自http://www.cs2d.com/faq.php?show=net_noentry#net_noentry,usgn官网F.A.Q中的“My server is not in the serverlist”
希望能解决你的问题
屏幕快照 2018-08-30 下午3.05.48.png
屏幕快照 2018-08-30 下午3.05.48.png
回复

使用道具 举报

发表于 2018-8-30 17:18:41 | 显示全部楼层
啦啦啦 发表于 2018-8-30 15:02
emm,这个我没听明白,是只显示在局域网中吗?服务器列表中没有?

对的
回复

使用道具 举报

 楼主| 发表于 2018-8-30 17:43:45 | 显示全部楼层
本帖最后由 啦啦啦 于 2018-8-30 19:20 编辑

请看下面的回帖
回复

使用道具 举报

发表于 2018-8-30 19:23:30 | 显示全部楼层

应该不是这个原因
回复

使用道具 举报

 楼主| 发表于 2018-8-30 19:32:27 | 显示全部楼层
本帖最后由 啦啦啦 于 2018-8-30 19:35 编辑
倦意 发表于 2018-8-30 19:23
应该不是这个原因

下面说的所有的都没用吗???可能我没有了解你的问题。别人看不到你的服务器?无法加入?是这个原因吗?
回复

使用道具 举报

发表于 2018-8-30 19:50:34 | 显示全部楼层
啦啦啦 发表于 2018-8-30 19:32
下面说的所有的都没用吗???可能我没有了解你的问题。别人看不到你的服务器?无法加入?是这个原因吗 ...

看不到服务器,服务器只显示在区域网(Lan)
回复

使用道具 举报

 楼主| 发表于 2018-8-30 22:29:01 | 显示全部楼层
This problem is caused by wrong firewall or router settings in 99% of all cases!
1. Configure your router (if you are using one)
Most routers have a web interface which can be accessed with your browser.
A common address for it is http://192.168.0.1 or https://192.168.0.1.

                               
登录/注册后可看大图

However there are many routers which use other addresses. Please check the manual of your router for details.
Contact the person who setup your router/internet if you need login data (or check the manual for defaults).
What you have to setup is port-forwarding. CS2D uses the UDP protcol and UDP Port 36963. Note that 36963 is the default port, you can also define another port in the server settings. Of course you always have to forward the port you defined in the settings.
Unfortunately we can't provide information here how it works because it depends on your router. So please either read the manual of your router or try to get info from the internet. For example at www.portforward.comAs alternative you can activate the DMZ Host option if you don't manage to setup port-forwarding properly. However this is a security risk and not recommended unless you are using a good software firewall.
2. Configure your firewall(s)
Make sure your firewall allows CS2D to access the internet!
You have to grant full internet access (incoming and outgoing) for your CS2D binary: CS2D(.exe) when using the client or cs2d_dedicated(.exe) when using the dedicated server program. Also - if possible - allow all traffic on UDP Port 36963 (or the port you chose in the server settings)!
For Windows users: Make sure that Windows Firewall doesn't block CS2D! Read the Windows Firewall article at Wikipedia!
3. Further problems and information
  • Make sure that "Offline/LAN" (sv_lan) is DISABLED (0) when you're running a server

                                   
    登录/注册后可看大图
  • Make sure that you see the IP of your server in the CS2D serverlist
  • Restart your server/pc (not just CS2D) completely if your server's IP does NOT appear in the serverlist (go to cs2d.com/servers to see if your server is listed
  • Start your server with the commandline parameter -realport if nobody can join and if the wrong port is listed in the serverlist (only happens with routers)
  • Port 36963 is default. You can also configure everything for another port and use this port for your server
  • Do not try to play CS2D when using a proxy. It will probably not work or it will be too slow
  • Read this guide/checklist if you still have problems!
转自:http://www.cs2d.com/faq.php?show=net_nojoin#net_nojoin

回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则